SIKA Eco Prep n Prime | WPD Group

$283.74

ECO SYSTEMS® PREP "N" PRIME is a unique flexible water based primer specifically designed with advanced adhesion properties for use on existing tiles, smooth and non porous surfaces, including puddle flanges and pipe penetrations.

ECO SYSTEMS® PREP "N" PRIME enables the ability to tile over difficult, non porous surfaces without the need for mechanical surface preparation. Fast drying formulation allows for installation of tiles 1 hour after application. • No Mixing - single component. • No wastage. • Low VOC • Non flammable and non hazardous • Internal/ External applications • Easy application with brush or roller • Dries to a keyed finish • Excellent alternative to mechanical grinding and acid etching surfaces

Usage

ECO SYSTEMS® PREP "N" PRIME is suitable for the priming of non porous substrates and difficult to adhere to substrates prior to the application of Ceramic tile, Porcelain, Stone and other Sika coatings. ECO SYSTEMS® PREP "N" PRIME is designed to bond to PVC pipe penetrations & puddle flanges, and metal floor drains / wastes. ECO SYSTEMS® PREP "N" PRIME can be used both internally and externally.

Advantages

Packaging

1 Ltr , 4 Ltr and 10 Ltr Pails

Colour

Blue Liquid

Composition

Stryrene-acrylate copolymer.

Shelf life

12 Months from date of manufacture

Storage conditions

Store in dry cool conditions out of direct sunlight and excessive heat.

Substrates

ECO SYSTEMS® PREP "N" PRIME can be used over the following substrates:

Priming of pipe penetrations, puddle flanges and drain grates manufactured from zincalume, stainless steel, copper, brass and metals
Priming over glazed tiles (glossy tiles require mechanical preparation prior)
Priming over vinyl tiles (non cushion backed) and laminates (dry areas only)
Priming over PVC puddle flanges
Priming of Sikatite Moisture Seal Vapour Barrier
Priming of general non-porous and shiny surfaces* (dry areas only)

*conduct bond test prior to tiling application

Substrate Temperature

Min 5°C to Max 35°C

Waiting Time / Overcoating

Application	Wait Time
Primer over existing tiles	40 mins - 1 Hour
Priming prior to waterproofing	3 - 5 hours
Primer over non porous substrates and puddle flanges	1hr +

* Values determined at laboratory conditions: 23°C & 50% RH. Site conditions will vary wait times.

Higher temperatures with reduce times and cool temperatures with extend times.

High Humidity will slow drying of primer.

Consumption

8-10m2 per litre depending on surface porosity and finish

Downloads

Sika Eco Prep n Prime PDS

Sika Eco Prep n Prime SDS