Drizoro Maxgrout | WPD Group

MAXGROUT is a one-component non-shrink mortar formulated from special cements and well-graded mineral products which provides high mechanical properties and fluidity. Contains no chlorides or metal particles. Our grout sealer comes in powder form, ready to use mixing only with water.

APPLICATION FIELDS

• Anchoring of pillars in concrete prefabricated structures.
• Filling of steel column bases.
• Beam support in bridges.
• Anchoring of bolts, cables, etc.
• Filling of machinery foundation between concrete and steel plates.
• Structural repair and strengthening of damaged or weak concrete structures such as foundations, beams, pillars, etc.
• Repairing joints in pavements.
• Void-filling corrective process and consolidation under concrete slabs.

ADVANTAGES

• High early and ultimate strength.
• Very good adhesion on surfaces, it becomes a structural part of the substrate and withstands repeated loads.
• Non-shrink and with slight expansion, does not lose contact with the substrate where it is used.
• High cohesion of the fresh mortar without segregation or bleeding.
• Waterproof, fireproof and non-toxic.
• Unaffected by extreme temperatures once set.
• Contains no chlorides or metal particles, it is non-corrosive for steel surfaces.
• Resistant to water, oil and grease.

CONSUMPTION

A 25 kg bag of MAXGROUT fills a volume from about 12,5 to 13,5 litres approximately (0.5 – 0.54 l/kg), depending on the mixing water.

Approximately 2kg/m² of MAXGROUT per mm of thickness.

A mixture adding 8 kg of sand with size from 3 to 5 mm per 25 kg bag of MAXGROUT fills a volume from about 16,25 to 17 litres approximately (0.65 – 0.68 l/kg), depending on the mixing water .

Approximately 1.4 kg/m² of MAXGROUT per mm of thickness.

PACKAGING

MAXGROUT  is supplied in 25 kg bags.

STORAGE

Twenty four months in its original unopened containers. It must be stored in a dry and covered place at temperatures above 5ºC, protected from frost.

DOWNLOADS

Drizoro Maxgrout PDS

Drizoro Maxgrout SDS